Independent UK roofing cost guides

Tools

Fascia and Soffit Cost Calculator UK: Price to Replace

By the Professional Roofers team

Updated 2026 · Independent cost guide

Fascias and soffits are the boards that close off your roof edge, and they are usually replaced along with the guttering while the access is up. This works out a realistic cost from the length of roofline you are doing and the board material, then adds an allowance for two-storey access. Roofline length is the single figure that moves the price, so measure it before you take a quote.

Estimate your fascia and soffit cost

Total run of eaves and verges being replaced.
Supply and fit, fascia plus soffit.
Higher work needs safe access, which adds cost.

Figures are typical UK supply-and-fit ranges for 2026 and cover labour, boards and disposal of the old timber. They are a sense check, not a quote. Rotten rafter ends, deep bargeboards or a full scaffold on an awkward site can push a job above the range.

Soffit and fascia cost calculator UK: the rates behind the estimate

The calculator multiplies your roofline length by a supply-and-fit rate for fascia plus soffit, adds guttering if you tick it, then adds 25% for two-storey work to cover scaffold or tower access. These are the rates it uses, per linear metre:

ItemPer metre, supplied and fitted
uPVC fascia and soffit, standard white£45 to £65
uPVC, woodgrain or foiled finish£60 to £85
Timber, painted softwood£55 to £80
Aluminium£80 to £120
Guttering and downpipes (optional)£18 to £30
Two storeys or moreadd 25% to each line

Most of that is labour and access, not boards. The Federation of Master Builders puts the materials alone at about £9.60 a metre for uPVC fascia and £10.45 for uPVC soffit, £6.00 for timber fascia and £17.00 for aluminium fascia (prices correct as of January 2026, FMB). That is why a quote barely changes when you switch board colour, but changes a lot when the job needs a scaffold.

Worked examples in standard white uPVC

Run through the calculator, these typical rooflines give:

House and rooflineBoards onlyWith new guttering
Terrace, 5 m wide, front and back eaves (10 m), two storeys£560 to £810£790 to £1,190
Semi, 7 m by 9 m, front, back and one gable (23 m), two storeys£1,290 to £1,870£1,810 to £2,730
Detached, 9 m by 8 m, all four sides (34 m), two storeys£1,910 to £2,760£2,680 to £4,040
Bungalow, 10 m by 8 m, all four sides (36 m), single storey£1,620 to £2,340£2,270 to £3,420

Small jobs can come in above these figures, because a scaffold has a minimum charge whatever the length of roofline. Trade2base's 2026 pricing guide for roofers puts two-storey scaffolding at £400 to £900 per elevation per week, so a short terrace run may carry the same access cost as a long one.

How to measure your roofline

Roofline length is the total run of boards being replaced: the eaves along the front and back where the gutters sit, plus the bargeboards up each gable end you are doing. A mid-terrace usually has front and back eaves only. A semi adds one gable, and a detached house can have all four sides. Pace it out at ground level, or use the house width and depth option above, which takes the full perimeter, then knock off any sides you are not replacing.

How the calculator compares with other 2026 price guides

Published per-metre figures vary because some include guttering, VAT or scaffolding and some do not. Trade2base (8 June 2026) gives £40 to £70 a metre for a full fascia and soffit replacement, £25 to £45 to cap over existing timber, £15 to £35 for guttering and downpipes and £40 to £65 for bargeboards, with whole-house totals including access of £900 to £1,800 for a bungalow, £1,200 to £2,500 for a terrace, £1,800 to £3,500 for a semi and £2,500 to £5,000 or more for a detached house. Our standard uPVC rate of £45 to £65 sits inside that band, and the calculator adds guttering and access as separate lines so you can see where a quote differs. For prices by house type and when capping over is safe, see fascias and soffits replacement cost.

Replacement guttering and fascia costs: using the calculator for the whole roofline

Most people price fascias, soffits and guttering as one job, because they share the same access. Gutters are clipped to the fascia, so new boards mean taking the gutters down anyway. With the guttering box ticked, the calculator adds £18 to £30 a metre for new gutters and downpipes on top of the board rate. In standard white uPVC that makes a full roofline about £63 to £95 a metre on a bungalow and about £79 to £119 a metre on a two-storey house once the 25% access uplift is applied. The plastic itself is cheap: the FMB puts half-round plastic guttering at around £3 a linear metre. Almost all of that line is labour, brackets, outlets and downpipes.

Only pricing the gutters? Read the guttering row in the result on its own. That figure assumes the fascia stays where it is. If the old timber fascia is soft where the brackets screw in, a roofer will usually tell you to do both, because new gutters will not hold on rotten board.

How long the job takes

The FMB's guide gives 1 to 2 days for a terraced house, 2 to 3 days for a semi and 3 to 5 days for a detached house. Scaffold erection, new guttering or rot found once the old boards come off can add to that.

Check for asbestos before you accept a price

The Health and Safety Executive lists "AIB or asbestos cement soffits and fascias" among the places asbestos turns up on houses built or refurbished before 2000. Soffits made of asbestos insulating board (AIB) are the higher-risk type, and most work on AIB has to be done by a licensed contractor. If your soffits are flat grey sheet rather than timber or uPVC, ask the roofer how they will deal with it before the work starts. A quote that just says "strip and dispose" for a 1970s or 1980s house has not answered that question, and testing or removal will cost extra on top of anything this calculator shows. See the HSE's diagrams of where asbestos is found.

Frequently asked questions

Is there a calculator for replacement guttering and fascia costs in the UK?

Yes, the one on this page. Enter your roofline length, choose the board material, leave "Include new guttering and downpipes" ticked and pick the access height. It shows the boards and the guttering on separate lines, so you can check each part of a quote.

How long does it take to replace fascias and soffits?

About 1 to 2 days for a terraced house, 2 to 3 for a semi and 3 to 5 for a detached house, according to the FMB. Scaffolding, new guttering or rotten rafter ends can stretch that.

How do I work out the cost of new fascias and soffits?

Measure the length of roofline you are replacing in metres, then multiply by the fitted rate for your board material: about £45 to £65 a metre for standard white uPVC. Add £18 to £30 a metre for new guttering, and around 25% for a two-storey house that needs scaffold access.

How much do fascias and soffits cost per metre in the UK?

Supplied and fitted, standard uPVC fascia and soffit costs roughly £45 to £65 a metre on this calculator, aluminium £80 to £120 and painted timber £55 to £80. The boards themselves are a small part of that: uPVC fascia is about £9.60 a metre to buy, according to the FMB's January 2026 figures.

Does the estimate include VAT and scaffolding?

The two-storey option adds an allowance for access, but a full scaffold on an awkward site can cost more. Treat the result as a budget rather than a VAT-inclusive price, and check whether each quote says "including VAT" and "including scaffold" before you compare them.

Is it cheaper to cap over old fascias?

Yes, capping over sound timber with uPVC costs less, about £25 to £45 a metre in Trade2base's 2026 guide. It is only worth doing if the old boards and rafter ends are dry and solid; capping rotten timber hides the problem rather than fixing it.

Want costs like this each month?

Join the Roofline brief for current UK prices and quote-reading tips.

Subscribe free

The Roofline brief

Real roofing prices, before you ever pick up the phone.

One careful email a month: current UK costs per m², what a fair quote looks like, and the small print that catches homeowners out. No spam, no sales calls.

Join homeowners getting clear, independent roofing numbers. Unsubscribe any time.